![ProMaster XC-M 522 Column Tilt Adapter](/assets/product/591153/5631fa21-4ba2-4abe-8281-11743cb15709.webp)
![ProMaster XC-M 522 Column Tilt Adapter](/assets/product-additional/591153/482j8KbtpfcBl2YT4_s0isJKk.png)
![ProMaster XC-M 522 Column Tilt Adapter](/assets/product-additional/591153/7b0_UtnWYUqdkHHLPUe0acGJk.png)
new-product-page
ProMaster XC-M 522 Column Tilt Adapter
in Tripods & Monopods sold by Camera House
$39.95
Description and specs
The technical details behind this tilt adapter
ProMaster XC-M 522 Column Tilt Adapter (4021) expands the capability of your XC-M 522 aluminum or XC-M 522C carbon fiber tripod by giving it's the center column the freedom to tilt 180o (90o up & 90o down). This adapter essentially converts your XC-M's center column into a multi-position, adjustable boom. Simply unscrew the weight hook from the center column, loosen the center column twist lock and slide it out of the tripod. You can replace it with the 4021 Column Tilt Adapter, tighten the twist lock, and open the flip-lock on the Column Tilt Adapter. Insert the center column and close the flip lock. This conversion can easily be done in less than 30 seconds. Once your XC-M 522 has been converted you can reinstall the weight hook to the bottom of the adapter and add weight for more stability. A second, retractable weight hook is included with this adapter which you can use at the end of the boom (end of the center column) to counterweight your camera.
To operate the boom, loosen the main knob on the 4021 Adapter while holding your camera and then tilt the assembly into whatever position you like before tightening the knob. To rotate the boom, loosen the twist lock on the yoke of the tripod and spin the adapter. To extend or retract the boom using the twist lock on the column to adjust its upper stage. This adapter has a number of teeth machined within its joint to give it an excellent amount of holding power in various tilt positions. Be sure to tighten its main knob before you release your camera to prevent it from falling. The 4021 Column Tilt Adapter can be installed and used permanently on your XC-M 522 if you so choose because it can achieve the same vertical position as the 'normal' center column when needed. It's great for macro work, extending your camera over a tabletop or a flowing creek.
Top three Reasons we think you will love this tilt adapter
- Reliable
- Useful
- Great Quality
Delivery and returns
Flat Rate $9.95 for delivery. Estimated shipping times: NSW (1-2 days), VIC (2-3 days), QLD (2-3 days), SA (3-4 days), WA & NT (4-6+ days), TAS (4 days)
More specials from this store
View more