Rinnai Builders 60oC 16L Instant Hot Water System B16N60A B16 *NATURAL GAS*

The Rinnai hot water Instantaneous/Continuous systems work by heating water as it passes through the unit so you only use energy when you turn the tap on. This process makes the Rinnai hot water systems extremely energy efficient systems, by only heating water when required. In turn, it reduces your running costs, as well as greenhouse gas emissions.

The compact Rinnai 16 will continuously supply hot water to one bathroom homes. It's also the most energy efficient 16L continuous flow system on the market, and is available in LP or Natural Gas.

Please Note: Any hot water unit preset above 50oC requires a plumber to install an approved Tempering Valve on the hot water branch line to the bathrooms to set the water at a maximum of 50oC. This allows for the hotter water to be supplied to the kitchen & laundry which is best for cutting greases and rinsing.

Low running costs
Highly efficient 6.2 Star Gas Energy Rating
Low greenhouse gas emissions
Superior technology
Precise temperature control for safety and convenience
Compact design allows installation flexibility
10 year warranty on heat exchanger
Instantaneous/Continuous System
Please note this is NOT the INFINITY model - it is B16

IMPORTANT: Please confirm with your plumber before purchasing that this is the correct model you require..

• Bathrooms 1
• Gas Energy Rating 6.2
• Heating Capacity L/Min (raised at 25oC) 16
• Cold water connection (mm) 15 (1/2")
• Hot Water Connection (mm) 15 (1/2")
• Gas Connection (mm) 20 (3/4")
• Minimum/Max Flow L/Min 2.4/20

This is the Builders Model, not the Infinity. We are able to offer great prices because of this. The only differences between the two are a slight colour difference, also the infinity model has a status monitor which shows the current temperature and any error codes, as well as 12 Years Warranty on the heat exchanger instead of 10.

Please Note: Any hot water unit preset above 50oC requires a plumber to install an approved Tempering Valve on the hot water branch line to the bathrooms to set the water at a maximum of 50oC. This allows for the hotter water to be supplied to the kitchen & laundry which is best for cutting greases and rinsing.