Stiebel Eltron DHF13CAU Instantaneous 3 Phase Electric Water Heater DHF 13 C AU

Instantaneous hot water when needed.

The STIEBEL ELTRON DHF C AU is a hydraulically controlled instantaneous three phase electric water heater with a two-stage temperature selection that offers maximum performance and has a compact design to be installed in the tightest of spaces. Designed as a replacement hot water system for certain types of three phase electric instantaneous water heaters in New South Wales.

High quality STIEBEL ELTRON design

• Made in Germany, designed for Australian conditions
• Hydraulically controlled
• DHF incorporates a control valve that compensates automatically for most pressure fluctuations in the water supply.
• Two-stage temperature and output selection
• WaterMark approved, Lic No.WMKA00301, AS3498
• 5 year domestic warranty (*Conditions apply.)

Installation flexibility

• Compact in size for space saving installation
• No safe tray or drainage required

Data Sheet
Operation, Installation & Warranty

FEATURES
Made in Germany, designed for Australian conditions
Hydraulically controlled
DHF incorporates a control valve that compensates automatically for most pressure fluctuations in the water supply.
Two-stage temperature and output selection
WaterMark approved, Lic No.WMKA00301, AS3498
5 year domestic warranty (*Conditions apply.)

Rated output (415V): 14.2kW

Rated current (415V): 19.7Amp

Phases: 3/P/PE

Electrical Installation: As per AS/NZS3000

Installation requirements: AS/NZS3500.4.2 & local requirements

Switch on flow rate (minimum flow rate required to switch on the water heater): Half power 3.0L/min || Full power 4.5L/min

Normal output (dial selection) 415V: Position * 7.1kW || Positon ** 14.2kW

Permissible operating pressure: 1000kPa

Temperature adjustment: N/A

IP Rating: IP24

Weight: 4kg

Nominal capacity: 0.6L

Approvals: WaterMark Lic No. WMKA00301, AS3498

For one/several draw off points: Yes/Yes

Heating system: Copper Tubular