NOVA3D Water Washable Lower Odor Rapid Resin 405nm Photopolymer Resin for LCD 3D Printing Opaque Colour
NOVA3D Water Washable Resin
Great Point
- Good fluidity:
Low viscosity,good fluidity makes it easy to separate the cured resin from the uncured one. Reduce the printing time, improve the success rate on printing.
- Low odour:
Comparing with the standard resin, the water washable resin is much less odour.
- Water washable:
The model is washable in water or water flow. No residue after washing.
- High efficiency:
It takes less time to cure the resin, time-saving and increasing the efficiency.
- High safety:
No necessary to use alcohol or other industrial solvents, Effective to avoid cleaning solvents to the body caused damage.
- High success rate on printing:
Appropriately 99%
- High detailed:
Smooth surface after cured. Highly detailed.
- Compatibility:
Compatible with most 395-410nm MSLA printers on the market.
- Fresh colour and fadeless:
Fresh colour, fadeless, not easy to turn yellow.
- Easy to remove:
Cured model is easy to remove and reducing the possibility of breaking the plate or model when removing it.
- Wide implication field:
Architecture, jewellery, dentistry, animation, daily life etc. Different scenario of use.
Specifications
Bending modulus 1.882-2.385Mpa
The bending strength 40-70Mpa
Thermal deformation temperature 80℃
Coefficient of thermal expansion 95*E-6
Volume shrinkage 3.72-4.24%
Line shrinkage 1.05-1.35%
The tensile strength 30-52Mpa
Tensile rate 1.779-2.385Mpa
Hardness 80-85D
Vitrification temperature 100℃
The density of 1.05-1.25g/cm³
Notch impact strength 41-48j/m
Wide Compatibility
- Nova3D washable resins are applicable to most 395nm-405nm 3d printers.
About NOVA3D:
- Founded in 2016, Nova3D is a high-tech enterprise integrating 3D printer R&D, sales and service, and has established its own brand Nova3D.
- At present, Nova3D is mainly engaged in developing LCD 3D printer and 3D printing resins, devoting to bringing the users with better 3D printing experience.
- Nova3D has always been adhering to the principle of simple-to-operate, and will move on to make consistent efforts for every creator to “print what you want”